Einhell PXC 18V to Dyson V10 Battery Adapter

Use your Einhell 18V PXC batteries on Dyson V10 cordless tools, without buying into a second battery platform. The molded ABS housing keeps it light and hard-wearing, and pure copper contacts keep current delivery steady. A practical way to extend the value of the Einhell 18V PXC batteries you already have. It also carries battery protection electronics (BMS) inside.

Specifications

• SKU PTA-EIN18-DYSV10
• Fits this battery Einhell 18V PXC (Lithium-Ion)
• Battery voltage 18V
• Runs these tools Dyson V10 (Lithium-Ion)
• Housing ABS (Injected)
• DC-DC converter Yes
• Terminals Copper
• Current rating 60A continuous (100A peak at 18VDC for up to 2 seconds)1512 Watt continuous at 25.2V nominal
• Weight 194 g (6.8 oz / 0.43 lb)
• Colour Grey
• Operating humidity 5–95% RH
• Operating temperature -10 °C to 50 °C (14 °F to 122 °F)
• USB port No
• Built-in BMS protection Yes
• What's in the box Battery Adapter
• Warranty 12 months after the date of delivery
• Revision Revision 01 (released on August 20, 2026)

Why choose this adapter

• A Battery Management System inside the adapter cuts power before the battery is drained too far — protection your battery may not have on its own.
• Injection-moulded ABS, not 3D printed — no layer lines to split under load.
• Solid copper terminals, so less of the current is lost as heat.
• Rated for 60A continuous with 100A peak at 18VDC for up to 2 seconds, so a high-draw tool is not held back by the adapter.
• Covered by a 12-month warranty from the day it arrives.

Einhell 18V PXC and Dyson V10 compatibility

It works in one direction only: Einhell batteries powering Dyson tools. For the opposite pairing, see adapters that run on Dyson V10 batteries.

Compatibility can vary with the exact battery and tool model. Before ordering, confirm that your battery belongs to the Einhell 18V PXC platform and that your tool takes Dyson V10 batteries.

Important charging and safety information

This adapter is for powering cordless tools and nothing else. It cannot charge Einhell or Dyson batteries and must never be connected to a charger of any kind. Always take the battery out of the adapter before charging, and charge it on the original charger made for your Einhell 18V PXC battery.

Before you buy

Use a battery of at least 4 Ah — 5 Ah or more is better. A higher-voltage tool draws harder on the battery, and a small one can sag until its own protection cuts out before it is empty.